Refer to the exhibit. A router-on-a-stick configuration was implemented for VLANs 15, 30, and 45, according to the show running-config command output. PCs on VLAN 45 that are using the 172.16.45.0 /24 network are having trouble connecting to PCs on VLAN 30 in the 172.16.30.0 /24 network. Which error is most likely causing this problem?​

Refer to the exhibit. A router-on-a-stick configuration was implemented for VLANs 15, 30, and 45, according to the show running-config command output. PCs on VLAN 45 that are using the 172.16.45.0 /24 network are having trouble connecting to PCs on VLAN 30 in the 172.16.30.0 /24 network. Which error is most likely causing this problem?​

CCNA2 v7 SRWE - Modules 1 - 4: Switching Concepts, VLANs, and InterVLAN Routing Exam Answers 05

CCNA2 v7 SRWE – Modules 1 – 4: Switching Concepts, VLANs, and InterVLAN Routing Exam Answers 05

  • The wrong VLAN has been configured on GigabitEthernet 0/0.45.
  • The command no shutdown is missing on GigabitEthernet 0/0.30.
  • The GigabitEthernet 0/0 interface is missing an IP address.
  • There is an incorrect IP address configured on GigabitEthernet 0/0.30.
    Answers Explanation & Hints:

    he subinterface GigabitEthernet 0/0.30 has an IP address that does not correspond to the VLAN addressing scheme. The physical interface GigabitEthernet 0/0 does not need an IP address for the subinterfaces to function. Subinterfaces do not require the no shutdown command.

For more question and answers:

Click Here CCNA 2 SRWE – Modules 1 – 4 – Switching Concepts, VLANs, and Inter-VLAN Routing Exam Answers Full 100%

Leave a comment