6.3.3.8 Packet Tracer – Inter-VLAN Routing Challenge

6.3.3.8 Packet Tracer – Inter-VLAN Routing Challenge

Packet Tracer – Inter-VLAN Routing Challenge (Answer Version – Optional Lab)

Answer Note: Red font color or gray highlights indicate text that appears in the Answer copy only. Optional activities are designed to enhance understanding and/or to provide additional practice.

Topology

6.3.3.8 Packet Tracer – Inter-VLAN Routing Challenge

6.3.3.8 Packet Tracer – Inter-VLAN Routing Challenge

Addressing Table

Device Interface IP Address Subnet Mask Default Gateway
R1 G0/0 172.17.25.2 255.255.255.252 N/A
G0/1.10 172.17.10.1 255.255.255.0 N/A
G0/1.20 172.17.20.1 255.255.255.0 N/A
G0/1.30 172.17.30.1 255.255.255.0 N/A
G0/1.88 172.17.88.1 255.255.255.0 N/A
G0/1.99 172.17.99.1 255.255.255.0 N/A
S1 VLAN 99 172.17.99.10 255.255.255.0 172.17.99.1
PC1 NIC 172.17.10.21 255.255.255.0 172.17.10.1
PC2 NIC 172.17.20.22 255.255.255.0 172.17.20.1
PC3 NIC 172.17.30.23 255.255.255.0 172.17.30.1

VLAN and Port Assignments Table

VLAN Name Interface
10 Faculty/Staff Fa0/11-17
20 Students Fa0/18-24
30 Guest(Default) Fa0/6-10
88 Native G0/1
99 Management VLAN 99

Scenario

In this activity, you will demonstrate and reinforce your ability to implement inter-VLAN routing, including configuring IP addresses, VLANs, trunking and subinterfaces.

Requirements

  • Assign IP addressing to R1 and S1 based on the Addressing Table.
  • Create, name and assign VLANs on S1 based on the VLAN and Port Assignments Table. Ports should be in access mode.
  • Configure S1 to trunk, allow only the VLANs in the VLAN and Port Assignments Table.
  • Configure the default gateway on S1.
  • All ports not assigned to a VLAN should be disabled.
  • Configure inter-VLAN routing on R1 based on the Addressing Table.
  • Verify connectivity. R1, S1, and all PCs should be able to ping each other and the cisco.pka server.

 

!S1!!!!!!!!!!!!!!
en
config t
interface vlan 99
ip address 172.17.99.10 255.255.255.0
no shutdown
ip default-gateway 172.17.99.1
!Note: VLAN naming only requires the first letter be correct
vlan 10
name Faculty/Staff
vlan 20
name Students
vlan 30
name Guest(Default)
vlan 88
name Native
vlan 99
name Management
interface range fa0/11 - 17
switchport mode access
switchport access vlan 10
interface range fa0/18 - 24
switchport mode access
switchport access vlan 20
interface range fa0/6 - 10
switchport mode access
switchport access vlan 30
interface g0/1
switchport mode trunk
switchport trunk native vlan 99
interface range fa0/1 - 5 , g1/2
shutdown
do write
!R1!!!!!!!!!!!!!!!!!!
 ena
 conf t
 interface GigabitEthernet0/1
 no shutdown
 interface GigabitEthernet0/1.10
 encapsulation dot1Q 10
 ip address 172.17.10.1 255.255.255.0
 interface GigabitEthernet0/1.20
 encapsulation dot1Q 20
 ip address 172.17.20.1 255.255.255.0
 interface GigabitEthernet0/1.30
 encapsulation dot1Q 30
 ip address 172.17.30.1 255.255.255.0
 interface GigabitEthernet0/1.88
 encapsulation dot1Q 88 native
 ip address 172.17.88.1 255.255.255.0
 interface GigabitEthernet0/1.99
 encapsulation dot1Q 99
 ip address 172.17.99.1 255.255.255.0
 do write