188.8.131.52 Lab – System Restore and Hard Drive Backup Answers
Lab – System Restore and Hard Drive Backup (Answers Version)
Answers Note: Red font color or gray highlights indicate text that appears in the Answers copy only.
In this lab, you will create a restore point and use it to restore your computer. You will also configure a hard drive backup.
- A computer running Windows
- A second partition to store backup or an external drive
Part 1: System Restore
Step 1: Create a restore point.
- Open Control Panel > select System > select System Protection.
- In the System Protection tab, click Create.
- Click the System Protection tab in the System Properties window and then click Create.
- In the Create a restore point window, enter Application Installed and click Create.
- You will be notified in the Systems Protection window when the restore point has been created successfully. Close the message window when done.
- Click OK to close the System Properties window.
Step 2: Work in the System Restore utility.
- In the Control Panel, select Recovery. Click Open System Restore.
- The System Restore window opens, click Next.
- A list of restore points is displayed in the System Restore window. Search for the one named Application Installed if there is more than one in the list.
What type of restore point did you create in the previous step?
A manual restore point.
- Close all open windows.
Step 3: Enable Windows web server.
In this step, you will enable the Windows web server, Internet Information Services.
- Open the Control Panel. In the Small icon view, select Programs and Features Click Turn Windows features on or off in the left panel to access Windows Features.
- In the Windows Features window, select the Internet Information Services. Click OK to continue.
- When the message displays Windows completed the requested changes, click Close.
- Close all remaining open windows.
- Open a web browser. Navigate to http://localhost. The IIS default page will open.
- Close the browser.
Step 4: Verify that you successfully installed the IIS service.
- Click Control Panel > Administrative Tools > Internet Information Services (IIS) Manager.
- If the Internet Information Services (IIS) Manager window opens asking Do you want to get started with Microsoft Web Platform to stay connected with latest Web Platform Components? Click No.
- Close all open windows.
Step 5: Save a new document in the Documents folder.
- Create a text document with the following text: This is a test for a Restore Point.
- Save the document as Restore Point Test file in the Documents folder.
Step 6: Restore the computer back to the restore point you created in a previous step.
- Click Control Panel > click Recovery > click Open System Restore.
- In the System Restore window, select the Application Installed restore point that was created in step 1 and click Next.
- The Confirm your restore point window opens. Click Finish.
- A warning message window opens telling you that the System Restore process should not be interrupted once it begins, and asks if you want to continue. Click Yes to start the system restore process.
Note: Windows will restart the computer to complete the System Restore process.
Step 7: Verify that the System Restore process completed successfully.
The operating system restores to the point before the IIS application was installed. This can take several minutes to complete.
- Log on to the computer if required.
- Click Close when the System Restore window opens to inform you that the System Restore completed successfully.
- From the Control Panel, click Administrative Tools.
Is the IIS Manager application listed?
No, IIS Manager is no longer available.
- Open a web browser and navigate to http://localhost.
Did the IIS Server page display?
No, the IIS server is no longer installed on the computer.
- Close the web browser.
- Open File Explorer or Windows Explorer, and navigate to the Documents folder
Is the Restore Point Test File.txt in this folder? If so, are the contents the same in this document? Why?
Yes, the txt document should be in the Documents folder and it should still contain the sentence that was saved in the previous step. The system restore process does not affect user documents.
- Close all open windows.
Part 2: Hard Drive Backup (Windows 8 and 10)
Microsoft introduced a new way to protect your data files in Windows 8 called File History. File History supersedes the Backup and Restore features of Windows 7 and functions similarly to Apple’s Time Machine application, where it periodically (hourly by default) scans the file system and copies any changed files to another partition or external drive. Over time, a complete history of file changes can be viewed and restored, using the new Restore personal files utility. In this lab, you will turn on the File History utility and allow it to back-up your data files. You will then use the Restore personal files utility to restore some of your data files.
Step 1: Open the File History tool.
- Log on to the computer as an administrator.
- Navigate to the Control Panel. In the Small Icon view, click File History. (In Windows 10, Settings > Update & Security > Backup)
- In the File History window, click Turn on to turn on File History. File History is turned off by default.
Where will File History save files?
Answers will vary. The data files in this lab will be saved to a second partition on the hard drive.
- Note the options that are available on the left side of the window. In Windows 10, these options are also available: Backup > More options)
File History will save your data files when you turn it on. It displays a timestamp of the save in the File History is on box. You can click Run now, at any time, to have File History save your files immediately.
Step 2: Create and save two text files on the desktop.
- Save a text file with the text This is the original text in file one on the desktop named File One.
- Save a text file with the text The text in this file will be changed on the desktop named File Two.
Step 3: Run File History a second time.
- Navigate to File History. (Control Panel > in Small icon view, click File History.)
- Click Run now to create a backup of the newly created files.
Step 4: Use the Restore personal files utility to view File History.
- In the File History window, click Restore personal files.
- The Home – File History window displays the date and time of the last backup, along with file folder and library icons to navigate the backup locations. There is also file history navigation controls at the bottom of the window. Double-click on the Desktop folder.
- The Desktop – File History window displays the two text files that you saved to the desktop. Notice at the top of the window, to the right of the date and time of the backup, it displays 2 of 2. These numbers are telling you that this is the second backup of two backups. Click the left arrow icon on the bottom of the window.
- Notice the timestamp changes to an earlier date and time, and the numbers to the right of the timestamp change to 1 of 2. You are now looking at the first backup, made immediately after you turned on File History. File One and File Two are no longer showing.
Why are the two text files missing from the desktop folder of the first backup?
The text files had not been created yet. This view is showing what files were available at the timestamp listed.
- Close the Desktop – File History window.
Step 5: Make changes to the text files on the Desktop and create another backup history.
- Right-click File One and select Delete. To delete it permanently, empty the Recycle Bin.
- Edit File Two by adding the following text: This was added in step 5 of the lab. Save your changes.
- Navigate to the File History window and click Run now to create another save to the File History.
Step 6: Open the Restore personal files utility to review the File History.
- In the File History window, click Restore personal files. Navigate to the Desktop folder.
What files are shown in the desktop folder for the most recent backup?
Just File Two, File One was deleted from the desktop prior to the last save.
- Click the Previous version icon at the bottom of the screen to view the way the desktop looked before the last save.
Step 7: Restore user files.
- Select File One from the 2 of 3 File History window, then click the green Restore icon at the bottom-center of the window.
- When the Desktop window opens, notice that File One is back on the Desktop. Close the Desktop window.
- Navigate back to the Desktop – File History window, select and restore File Two. In The Replace or Skip Files window, click Replace the file in the destination.
- The Desktop window opens with File Two highlighted. Close all open windows.
- You should be able to locate both File One and File Two on your Desktop. Open File Two.
- Notice that the second line that you added to File Two is now missing.
How would you use File History to restore the second line back into File Two?
Answers may vary. All that you would need to do is use the Restore personal files option in the File History utility, make sure the 3 of 3 save is selected, then select File Two and click Restore.
- Close all open windows.
Step 8: Delete text files and turn off File History.
a. Delete File One and File Two from the Desktop.
b. Turn off File History. (Control panel > File History)
Part 3: Hard Drive Backup (Windows 7)
Step 1: Create back up files.
- Log on to the computer as an administrator.
- Create a text file on the desktop called Backup File One with the following text: The text in this file will not be changed.
- Create another text file on the desktop called Backup File Two with the following text: The text in this file will be changed.
Note: Remove all extra folders and files from the computer’s Desktop. This will help to reduce the length of time to complete the backup for this lab.
Step 2: Open the Backup and Restore tool
- Navigate to the Control Panel > In Small icon view, click Backup and Restore.
- Click Set up backup to start a new backup or click Change settings to edit the settings. Select the location where the backup will be stored. Click Next.
Note: If you are using the second partition, you will receive a warning message about using the same physical disk. You can ignore the message for the purpose of this lab. This is not a recommended practice outside of the classroom.
- Select Let me choose on the What do you want to back up? screen. Click Next to continue.
- Expand the current user account so you can view the different libraries that you can backup.
Click What files are excluded by default from the backup? and list the excluded files.
Program files, files stored on a FAT file system, Files in the Recycle Bin, and Temporary files on a drive smaller than 1GB.
- Close the Windows Help and Support window.
- Expand Additional Locations and make sure only Desktop is selected. Make sure no other location is selected. Remove the check mark from Include a system image of drives. Click Next to continue.
- In the Review your backup settings screen, click Change schedule.
- In the How often do you want to back up? Screen, select Run backup on a schedule (recommended). Set the following conditions and then click OK to continue.
How often: Daily
What day: blank
What time: 2:00 AM
Which files will be backed up?
New files that have been added to the Desktop and existing Desktop files that have been changed.
Step 3: Run the backup.
- To test the backup configuration, click Back up now. To view the progress of the backup, click View Details. The Windows Backup is currently in progress screen is displayed. When the Windows Backup has completed successfully message appears, click Close.
- Review the information beneath the Backup section of the Backup and Restore window.
When will the next backup take place?
Answers will vary; It will likely be 2:00 AM tomorrow.
What is the state of the schedule?
Step 4: Delete and restore files.
- Navigate to the Desktop and delete Backup File One and Backup File Two permanently by emptying the Recycle Bin.
- Navigate back to the Control Panel > click Backup and Restore. Under the Restore heading, click Select another backup to restore files from.
- In the Select the backup that you want to restore files from screen, select the location where the files are stored. Click Next to continue.
- In the Browse or search your backup for files and folders to restore screen, click Browse for files.
- In the Browse the backup for files window, click the current user’s backup. Open the Desktop folder and locate the files Backup File One and Backup File Two. Select both files and click Add files.
- Verify that the two files are listed for restoration. Click Next to continue.
- In the Where do you want to save the restored files? Screen, select In the original location. Click Restore to continue. Review the message in the Your files have been restored screen, click Finish.
- Navigate to the Desktop.
Are the two files restored to the Desktop?
Step 5: Modify, back up, delete, and restore a file.
- Edit file Backup File Two. Add the following text More text added. to the file. Save the file.
- Navigate back to the Backup and Restore window and click Back up now.
- Permanently delete Backup File Two from the Desktop.
- Navigate back to the Backup and Restore window and click Select another backup to restore files from to restore Backup File Two. Refer to the previous step as needed.
Navigate to the Desktop. Open file Backup File Two. What text is in the file?
The text in this file will be changed. More text added.
Step 6: Clean up
- Delete the files Backup File One and Backup File Two.
- Perform a System Restore using the saved restored point from a previous part in this lab.
- When would be a good time to create a manual restore point? Why?
Answers will vary. A good time to create a restore point is before installing new software on the computer. If the software has an adverse effect on the computer, you can use System Restore to revert to the way it was before installing the software without losing any changes to documents made after the restore point was created.
- When File History has been activated, how often does it automatically save your data files?
- How would you change the default save settings in File History?
You can change the default save settings by clicking on Advanced settings in File History. The Advanced Settings window allows you to change how often save copies of files are made. You can also change how long files are kept as well.