1.1.3.5 Packet Tracer – Configuring IPv4 and IPv6 Interfaces

1.1.3.5 Packet Tracer – Configuring IPv4 and IPv6 Interfaces

Packet Tracer – Configuring IPv4 and IPv6 Interfaces (Answer Version)

Answer Note: Red font color or Gray highlights indicate text that appears in the Answer copy only.

Topology

1.1.3.5 Packet Tracer – Configuring IPv4 and IPv6 Interfaces

1.1.3.5 Packet Tracer – Configuring IPv4 and IPv6 Interfaces

Addressing Table

Device Interface IPv4 Address Subnet Mask Default Gateway
IPv6 Address/Prefix
R1 G0/0 172.16.20.1 255.255.255.128 N/A
G0/1 172.16.20.129 255.255.255.128 N/A
S0/0/0 209.165.200.225 255.255.255.252 N/A
PC1 NIC 172.16.20.10 255.255.255.128 172.16.20.1
PC2 NIC 172.16.20.138 255.255.255.128 172.16.20.129
R2 G0/0 2001:DB8:C0DE:12::1/64 N/A
G0/1 2001:DB8:C0DE:13::1/64 N/A
S0/0/1 2001:DB8:C0DE:11::1/64 N/A
Link-local FE80::2 N/A
PC3 NIC 2001:DB8:C0DE:12::A/64 FE80::2
PC4 NIC 2001:DB8:C0DE:13::A/64 FE80::2

Objectives

Part 1: Configure IPv4 Addressing and Verify Connectivity

Part 2: Configure IPv6 Addressing and Verify Connectivity

Background

Routers R1 and R2 each have two LANs. Your task is to configure the appropriate addressing on each device and verify connectivity between the LANs.

Note: The user EXEC password is cisco. The privileged EXEC password is class.

Part 1: Configure IPv4 Addressing and Verify Connectivity

Step 1: Assign IPv4 addresses to R1 and LAN devices.

Referring to the Addressing Table, configure IP addressing for R1 LAN interfaces, PC1 and PC2. The serial interface has already configured.

Step 2: Verify connectivity.

PC1 and PC2 should be able to ping each other and the Dual Stack Server.

Part 2: Configure IPv6 Addressing and Verify Connectivity

Step 1: Assign IPv6 addresses to R2 and LAN devices.

Referring to the Addressing Table, configure IP addressing for R2 LAN interfaces, PC3 and PC4. The serial interface is already configured.

Step 2: Verify connectivity.

PC3 and PC4 should be able to ping each other and the Dual Stack Server.